Used National Machine Listings
|
|
|
|
|
|
|
|
|
List Price: $13,500.00
Condition: AS IS
Machine Stock Number: D8452
Member Stock Number: PL050000783
Serial Number: 61622
Description:
Greenlee Model 110
440 V
3 Phase, 60 Cycle
36" X 8" Capacity
20 HP
6-knife cutterhead
Powered raise and lowering beds
4 Speed feed
Motor feed rates are standard at 25, 40, 50 and 80 FPM
Grinding equipment
Approximate weight 8,300 lbs.
Reference #D-8452
|
|
|
|
|
|
|
|
|
|
|
List Price: $12,500.00
Condition: GOOD
Machine Stock Number: 50233
Member Stock Number: PL050000784
Serial Number: 9624001
Description:
Powermatic
Model 225
15 HP
24" Capacity
Connected 440 V
3 Phase, 60 Cycle
4 Knive High Speed Steel
4" Feed Rolls
Variable Speed Feed (20 - 100 FPM)
Maximum Depth of Cut is 1/2"
Stock Thickness 1/8" - 8"
Comes with Grinder
Weight = 3342 lbs.
Ref. # 50233
|
|
Click for Large Image
|
|
|
|
|
|
|
UNKNOWN - BRIDGEWOOD MODEL 3WM-31B 14" 3 SIDED PLANER MOULDER
|
|
|
|
|
|
List Price: $3,950.00
Condition: VERY GOOD
Machine Stock Number: 209044
Member Stock Number: PL030002597
Serial Number: 001905
Description:
209044 (1) Bridgewood Model 3WM-314B, 14 3-sided Planer Moulder, s.n. 001905, 14 x 8 planning capacity, 12 x 3 moulding capacity, 7.5HP, 3 Phase, 220 V, 14planer head motor, main cutter head can receive corrugated back knives, (2) 4 x 1Ό diameter, vertical side heads each driven by a 5HP, 3 Phase, 220 V motor, mechanical digital read-outs for side head vertical and horizontal movement, (2) 2 x 4-knife cutterheads, variable speed feed, hoods with 4 diameter openings, outfeed center hold-down, in good working order.
Price - $3,950.00
|
|
Click for Large Image
|
|
|
|
|
|
|
SCMI - S-63 24" SINGLE SURFACE PLANER
|
|
|
|
|
|
List Price: $3,750.00
Condition: ATFS
Machine Stock Number: 210019
Member Stock Number: PL030004200
Description:
210019 (1) SCMI Model S-63, 24 Single Surface Planer, 7 maximum thickness capacity, 12HP, 3 Phase, 230 V cutterhead motor, 4 knife cutterhead, power raise and lower on bed with mechanical digital read-out, variable speed feed, simultaneous bed roll raise and lower and locking mechanism, as taken from service.
Price - $3,750.00
|
|
Click for Large Image
|
|
|
|
|
|
|
NORTHTECH - NT-660C-20HCVS 26" SINGLE HEAD FINISH PLANER
|
|
|
|
|
|
List Price: $10,900.00
Condition: EXCELLENT
Machine Stock Number: 6809TC
Member Stock Number: PL020004106
Serial Number: 070242
Description:
Used Northtech Model NT-660C-20HCVS 26 Single Head Finish Planer; equipped with a 20HP cutterhead drive motor; with a 2HP DC variable speed feed motor delivering feed rates from 0 to 90 FPM; with a 1/2HP table raise and lower motor and with electrical controls wired for AC 3/60/230 volt operation; with a DP-525 ELECTRONIC key pad control which allows for exact table positioning, micro adjustable bed rollers; double section infeed rollers with double single UV rubber out-feed rollers; precision chip-breaker assembly with helical cutterhead (15 x 15 x2.5 solid carbide knives, Qty 156) is dynamically balanced and supported by NSK precision and sealed bearings and with all related equipment. This unit was installed in March 2008 and is in excellent condition.
|
|
Click for Large Image
|
|
|
|
|
|
|
BUSS - 44 BUSS 44 SINGLE HEAD PLANER
|
|
|
|
|
|
1955
List Price: $22,500.00
Condition: RECONDITIONED
Machine Stock Number: 4169
Member Stock Number: PL070002490
Description:
Used Buss 44 Single Head Planer, 30 HP; 36" wide 8" maximum thickness capacity; belt driven to cutterhead; shear cut helical insert knife cutterhead; 5 HP variable speed feed 35 to 105 FPM; 1/2 HP power raise and lower of table; sectional infeed rollers and chipbreaker; external adjustment of bed rollers. dust hood. 440 volt only;
|
|
Click for Large Image
|
|
|
|
|
|
|
BUSS - 66 DL BUSS 66 PLANER
|
|
|
|
|
|
1947
List Price: $19,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 4338
Member Stock Number: PL070002494
Description:
Used Buss 66 Planer; 25 HP 220/440 Volt 3 Phase 36" Width and 8" max. thickness cap.; 25 HP motor, direct drive to a four knife cutterhead; 5 HP variable speed feed 28 to 85 FPM; 0.5 HP power raise and lower of table; wedge bed construction; sectional infeed rollers and chipbreaker; external adjustment of bed rollers; Includes dust hood. Replaced coupling & insert. Yr 1947 SN 47146
|
|
Click for Large Image
|
|
|
|
|
|
|
BUSS - 55 DOUBLE SIDED PLANER
|
|
|
|
|
|
List Price: $29,500.00
Condition: RECONDITIONED
Machine Stock Number: 6736RT3
Member Stock Number: PL020002038
Serial Number: 54
Description:
Reconditioned BUSS Model 55 Double Sided Planer: 30 max. width 14 max. thickness Shortest stock: 28 single piece or 12 butted Four(4) Knife steel cutter heads Bottom head motor 25HP: Top head motor 40HP: Feed motor: 7.5HP Equipped with power activated bed 1/2HP motor w/Dust enclosure Serial no. 54.
|
|
Click for Large Image
|
|
|
|
|
|
|
WHITNEY - MODEL 205 PLANER
|
|
|
|
|
|
Condition: RECONDITIONED
Machine Stock Number: 5152
Member Stock Number: PL130003197
Description:
32 width capacity Newman QUIETCUT carbide cutterhead Motor: 30HP; 3PH; Section infeed rolls Sectional chipbreaker Grinding bar with grinder Feed motor 2HP variable speed Serial no. 18940
|
|
Click for Large Image
|
|
|
|
|
|
|
BUSS - MODEL 44 30 WIDE SINGLE SIDED PLANER
|
|
|
|
|
|
Condition: RECONDITIONED
Machine Stock Number: 5153
Member Stock Number: PL130003198
Description:
Width Capacity: 30 Thickness Capacity: 8 Cutterhead Motor: 20HP Four knife steel cutterhead Sectional feed rolls Sectional chipbreaker Variable speed feed Equipped with knife grinder 1/3HP Electrics 3PH; 220/440 volt.
|
|
Click for Large Image
|
|
|
|
.jpg)
.jpg)
.jpg)
.jpg)
